Need help?Do you have a question about the Renishaw Equator 500 and is the answer not in the manual?
General| Maximum Part Weight | 100 kg |
|---|---|
| Controller | Equator Controller |
| Software | MODUS software |
| Working Volume | 500 mm diameter x 250 mm height |
| Temperature Range | 15 °C to 35 °C (59 °F to 95 °F) |
Technical details and performance metrics for the Equator 300.
Diagrams and measurements of the Equator 300's physical layout.
Technical details and performance metrics for the Equator 500.
Diagrams and measurements of the Equator 500's physical layout.
Technical specifications for the Equator Controller, Version 08, including ports and ratings.
Technical specifications for the Equator Controller, Version 09, including ports and ratings.
Details of the scanning probe kit components and specifications.
Details of the touch trigger probe kit components and specifications.
Specifications for the MCUlite-2 joystick, including button functions and controls.
Specifications for the Equator Button Interface, outlining its buttons and functions.
Essential safety precautions and warnings specific to the Equator 300 gauging system.
Essential safety precautions and warnings specific to the Equator 500 gauging system.
Safety advice and warnings related to the operation and handling of the Equator Controller.
Recommendations for personal protective equipment (PPE) when operating the machine.
Important considerations before receiving and setting up the Equator gauging system.
Step-by-step instructions for safely unpacking the Equator 300 gauging system.
Step-by-step instructions for safely unpacking the Equator 500 gauging system.
Guidelines for correctly positioning the Equator gauging system for optimal operation.
Recommendations for placing the Equator Controller for proper ventilation and access.
Detailed instructions for connecting cables to the Equator 300 system.
Detailed instructions for connecting cables to the Equator 500 system.
Steps for connecting the probe system to the Equator 300.
Instructions for attaching the probe adaptor to the Equator 500.
Steps for connecting the probe system to the Equator 500.
Instructions on how to attach styli to the probe module.
Guide on obtaining and installing the Equator license and software suite.
Overview and usage of control interfaces: stop button, joystick, and Button Interface.
Procedure for manually moving the Equator 300 platform in specific error situations.
Instructions for loading workpieces and fixture plates onto the Equator system.
Steps to power on and initiate the Equator gauging system software.
Process for activating the Equator system license using a downloaded file.
Procedure for homing the machine to establish zero positions for axes.
Steps to calibrate probing tools for accurate measurements.
First part of the procedure to locate the EQR-6 autochange rack.
Second part of the procedure to locate the EQR-6 autochange rack.
Instructions for safely shutting down the Equator system.
Procedure for replacing the fan filters in the Equator Controller for cooling.
Safety precautions and steps to take in case of liquid spillage on the system.
Interpretation of LED indicators and status signals for the Equator 300.
Interpretation of LED indicators and status signals for the Equator 500.
Common error messages, their causes, and suggested solutions for troubleshooting.
To Next Page
