Need help?Do you have a question about the Renishaw RMP60 and is the answer not in the manual?
General| Sealing | IP68 |
|---|---|
| Interface | Radio |
| Transmission Type | Radio |
| Operating Range | Up to 15 m |
| Unidirectional Repeatability | 1 µm |
| Stylus Length | 50 mm (standard) |
| Radio Frequency | 2.4 GHz |
| Repeatability | 1 µm |
| Stylus Tip Diameter | 6 mm (standard) |
| Type | Radio probe |
Details warranty terms and conditions for equipment requiring attention.
Renishaw's right to modify product specifications without prior notice.
Safety instruction for CNC machine operation by competent personnel.
Recommendations for maintaining the probe's condition and performance.
Lists patents and applications associated with the product.
Guidance on optimal placement of the RMI for reliable communication.
Instructions for fitting the weak link to the probe.
Instructions for removing a broken weak link from the probe.
Describes the probe's state when waiting for a signal.
Describes the probe's state when ready for use.
Describes the mode for configuring trigger logic and settings.
Lists available options for turning the probe on and off.
Suggests recording settings for quick reference and future needs.
Step-by-step guide for pairing the RMP60 probe with the RMI.
Instructions for safely replacing the batteries in the RMP60 probe.
Provides typical battery performance data under various usage scenarios.
First stage of mounting the RMP60 probe onto a shank.
Second stage detailing the process for adjusting stylus on-centre alignment.
Explains how the probe's trigger force is set and adjusted.
Steps for inspecting the outer diaphragm for damage.
Steps for inspecting the inner diaphragm for damage.
Troubleshooting guide for issues with the RMP60 not powering on.
Lists the RMP60 probe assembly and included items.
Lists different types of batteries available for the probe.
Details the available stylus part number and specifications.
Lists the part number and components of the weak link kit.
Lists the probe tool kit and its contents.
Lists the part number for the RMP60 outer diaphragm kit.
Lists the part number for the RMP60 battery cassette assembly.
Lists the part number for the battery cassette housing seal.
Section for recording the selected probe switch-on method.
Section for recording the selected probe switch-off method.
Section for recording the multiple probe mode setting.
To Next Page
