EasyManua.ls Logo

Renkforce T21 - C) Bluetooth Playback

Renkforce T21
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
c) Bluetooth
®
playback
TheampliersupportsBluetooth
®
, allowing you to stream audio from a Bluetooth
®
device. Before streaming
audio,followtheinstructionsbelowtopairyouraudiodevicewiththeamplier.
Pairing
Switchtheamplieron.
Press the volume control wheel (8) or the MODE button (14) on the remote control and set the audio input to BT.
TheBTLEDontheaudioinputindicator(4)willashquickly,indicatingthattheamplierisnotpairedwitha
Bluetooth
®
device.
Turn on your Bluetooth
®
device and enable Bluetooth
®
(refer to your device’s instruction manual for details).
Search for nearby Bluetooth
®
devices.
Select “BT Speaker” from the list of available devices.
Connectyourdevicetotheamplier.
If you are prompted to enter a password, enter 0000.
Oncethedeviceshavebeenpaired,theBTLED(4)ontheaudioinputindicatorwillstayconstant/ashslowly.
Ifthedevicesfailedtopair,repeattheabovesteps.YoumayneedtodeletetheamplierfromthelistofBluetooth
®
devices (refer to your device’s instruction manual for details).
You can only pair one Bluetooth
®
withtheamplieratanyonetime.Iftheamplierisalreadypairedwith
another Bluetooth
®
device, the existing connection must be disabled via the device’s Bluetooth
®
menu.
The Bluetooth
®
connection will be interrupted if the devices move out of range, or if you switch off the
amplierand/orBluetooth
®
device. The connection will be automatically re-established when the devices
are switched on and within range.
Ensure that you enable the automatic reconnection feature on your Bluetooth
®
device, otherwise the
Bluetooth
®
connection will not be automatically re-established (refer to your device’s instruction manual
for details).
Playback
Press the button(6)ontheamplierorremotecontroltostartorstopplayback.
Press the
button(5)ontheamplierorremotecontroltoskiptotheprevioussong.
Press the
button(7)ontheamplierorremotecontroltoskiptothenextsong.

Table of Contents