To Next PageTo Next Page
Need help?Do you have a question about the Reno A&E U-1400 and is the answer not in the manual?
Provides an overview of the Model U-1400 inductive loop vehicle detector and its applications.
Covers loop frequency settings and sensitivity levels for detector operation.
Details options for inductance display, noise filtering, and detection zone tracking.
Explains sensitivity boost levels and the audible detect signal feature.
Covers loop verification features and unique detector identification settings.
Details linking detectors via Synch and the Inductive Island Circuit for presence detection.
Explains the feature for determining vehicle travel direction on two-way trackage.
Covers delay, extension, and input/output mapping for vital outputs.
Details factory reset, diagnostic activation, and password protection features.
Details the physical dimensions, weight, power requirements, and electrical characteristics.
Outlines operational aspects including loop status indicators and response times.
Explains loop failure detection, loop check process, and vital input/output status indications.
Presents a table detailing response times based on sensitivity and synch configuration.
Lists the default configuration settings for channel and detector parameters.
Details the pin functions for the primary interface connector.
Provides pin assignments for auxiliary and communication ports.
Details pin assignments and corresponding wire colors for harnesses.
Describes the bargraph, segment display, and LED indicators on the detector.
Details the function of pushbuttons and the various connectors on the detector.
Guides through the initial power-up display sequence and detector ID setup.
Explains how to navigate and change detector parameters in program mode.
Details how to map loop status inputs to primary vital outputs.
Explains mapping loop status, vital, and health status inputs to auxiliary outputs.
Describes the various display states during normal operation of the detector.
Lists and explains error messages displayed on the LCD screen.
Details how loop check results are indicated on the LCD and LEDs.
Explains the status and failure indications for vital inputs and outputs.
Describes indications for series and parallel synch mode failures.
Explains how loop failures are indicated and monitored.
Guides on using the bargraph to select the optimal sensitivity level.
Covers restoring factory defaults, activating diagnostic features, and display tests.
Explains how to transfer or synchronize detector parameters between modules.
Provides guidance for diagnosing and resolving common detector issues.
Offers essential information regarding loop wire, inductance, and connections.
General| Brand | Reno A&E |
|---|---|
| Model | U-1400 |
| Category | Security Sensors |
| Language | English |
