Renogy BT-1 - Operation

06
Connect the BT-1 Bluetooth module to any Renogy solar charge controller with
an RJ12 port and RS232 communication protocol.
Connection
Operation
Solar Panel
Monitoring
Battery
Load
Voltage
Voltage:
Capacity Temp.
MPPT charge mode
Setting Device InfoRecordMonitoring
Current:
14.20V
0.00V 0.00A 0W
13.40V 0.84A
0.77A 11W
Current Power
Voltage Current Power
status: Normal
status: Normal
status: Close
100% 25℃