Need help?Do you have a question about the Renogy ROVER ELITE 40A and is the answer not in the manual?
General| Type | MPPT Solar Charge Controller |
|---|---|
| Model | ROVER ELITE 40A |
| Rated Charge Current | 40A |
| Battery Voltage | 12V/24V Auto |
| Max PV Input Power (12V) | 520W |
| Max PV Input Power (24V) | 1040W |
| Display | LCD |
| PV Input Voltage | Up to 100V |
| Communication | RS232, Bluetooth |
| Battery Type | Sealed, Gel, Flooded, Lithium, User Defined |
| Operating Temperature | -20°C to 50°C |
| Protection | Reverse Polarity, Overload, Short Circuit, Over Temperature |
General safety guidelines for handling the charge controller, including warnings and cautions.
Specific safety precautions related to the operation and connection of the charge controller unit.
Step-by-step instructions for connecting the battery to the charge controller.
Guide on choosing the correct battery type for optimal performance and safety.
Steps to configure voltage settings specifically for lithium batteries, including boost voltage.
Outlines the four distinct stages of the battery charging process: Bulk, Boost, Float, and Equalization.
Lists and explains common error codes and their corresponding troubleshooting steps.
To Next Page
