Reolink Argus Pro User Manual

Reolink Wireless Battery-powered Camera
12
Note:
1. Please power on the camera by power switch button before initial setup.
(Suits for Argus PT, Argus Eco, Argus 3, Argus 3 pro.)
2. If you are not sure whether you hear the right sound, you may tap "Demo" to
hear the sample sound. If you couldn't hear the repeated Ding sounds, please reset
your camera.
Step 2. Tap on the icon in the top right corner to start the initial setup.
Step 3. Scan the QR code on the back of the camera. If the phone doesn't respond,
please tap Input UID/IP and then manually type in the UID (16-digit characters
under the QR code of the camera).
Note: You may tap Light to enable flash light when setting up in a dark
environment.

Reolink Argus Pro Specifications

General

Field of View	130° diagonal
Audio	Two-way audio
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Motion Detection	PIR motion sensor
Resolution	1920 x 1080 (1080p)
Power Source	Rechargeable battery (solar panel compatible)
Connectivity	Wi-Fi (2.4GHz)
Night Vision	Up to 33 feet
Weatherproof	IP65
Storage	MicroSD card (up to 128GB)
Image Sensor	CMOS sensor
Video Resolution	1080p
Infrared Night Vision	Yes
PIR Detection Distance	Up to 33ft
Wireless Security	WPA2
Battery	5200mAh rechargeable battery
Power	5V/2A