Reolink Argus Pro User Manual

Reolink Wireless Battery-powered Camera
38
4.Alarm and Detection
Set up Motion Detection
About PIR Detection
Reolink battery-powered Wi-Fi cameras use PIR sensors (passive infrared sensors)
to detect motion.
The PIR sensor detects changes in the amount of infrared radiation impinging
upon it, which varies depending on the temperature and surface characteristics of
the objects in front of the sensor. When an object, such as a human, passes in front
of the background, like a wall, the temperature at that point in the sensor's field of
view will rise from room temperature to body temperature, and then return again.
The sensor converts the resulting change in the incoming infrared radiation into a
change in the output voltage, which triggers the detection. Objects of similar
temperature but different surface characteristics may also have a different infrared
emission pattern, thus moving them with respect to the background may trigger
the detector as well.
Turn on/off PIR
On the Devices page of the Reolink App, choose the camera and then directly tap
on PIR button to quickly turn on or turn off the PIR motion detection.

Reolink Argus Pro Specifications

General

Field of View	130° diagonal
Audio	Two-way audio
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Motion Detection	PIR motion sensor
Resolution	1920 x 1080 (1080p)
Power Source	Rechargeable battery (solar panel compatible)
Connectivity	Wi-Fi (2.4GHz)
Night Vision	Up to 33 feet
Weatherproof	IP65
Storage	MicroSD card (up to 128GB)
Image Sensor	CMOS sensor
Video Resolution	1080p
Infrared Night Vision	Yes
PIR Detection Distance	Up to 33ft
Wireless Security	WPA2
Battery	5200mAh rechargeable battery
Power	5V/2A