Reolink Argus Pro User Manual

Reolink Wireless Battery-powered Camera
14
Step 6. For Reolink battery-powered cameras, a QR code will be generated and
displayed on your phone. Please place the QR code on your phone in front of the
camera’s lens at a distance of about 20 cm (8 inches) and let the camera scan the
QR code. Tick “I have heard the beep sound from the camera” or “I have heard the
voice prompt” and tap Next.
Note:
1. Please rip off the protection film of the camera’s lens.
2. You may double tap on the QR code to enlarge it.
Step 7. After the beep sound, the camera will try to connect to the router, please
wait for 60 seconds.

Reolink Argus Pro Specifications

General

Field of View	130° diagonal
Audio	Two-way audio
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Motion Detection	PIR motion sensor
Resolution	1920 x 1080 (1080p)
Power Source	Rechargeable battery (solar panel compatible)
Connectivity	Wi-Fi (2.4GHz)
Night Vision	Up to 33 feet
Weatherproof	IP65
Storage	MicroSD card (up to 128GB)
Image Sensor	CMOS sensor
Video Resolution	1080p
Infrared Night Vision	Yes
PIR Detection Distance	Up to 33ft
Wireless Security	WPA2
Battery	5200mAh rechargeable battery
Power	5V/2A