Reolink Argus Quick Start Guide

Install Reolink App
Scan the QR code below to download and install the app.
There are two ways to get the Reolink App:
Available on the
Get it on
Search “Reolink” in App Store (for iOS), or Google
Play (for Android), download and install the app.
Set up the Camera
Please follow the prompt tone
WRFRQJXUHWKHFDPHUD
Camera has been started up. Please
run Reolink App. Click the "Add New
Device" button, and follow the instructions
to set up the camera.
Please click the “ ” button in the
top right corner to add the camera.
1.
2. Scan QR code on the camera.
Note 1：
Your family can click
"Access Camera" for live
view after the initial setup.
Note 2：
If you have a Reolink Base,
please follow the Quick Start
Guide of the Base to add the
camera.The Reolink Base is
not included in the package.
3. Click “Connect to Wi-Fi” to
continue.

Reolink Argus Specifications

General

Video Format	H.264
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4 GHz
Operating Temperature	-10° C to 55° C (14° F to 131° F)
Resolution	1080p Full HD
Connectivity	Wi-Fi
Field of View	130°
Audio	2-way audio
Weatherproof	IP65
Storage	microSD card (up to 128GB)
Wireless Security	WPA/WPA2