Reolink B800 User Manual

8English7 English
Specifications
• Please check if the camera is powered on. Reset the camera and cover
the daylight sensor on the camera lens or turn o the lights for a few
seconds to see if the infrared LEDs will turn on.
If these won’t work, please contact Reolink Support
https://support.reolink.com/.
If you fail to upgrade firmware for the camera, please try the following
solutions:
• Confirm the current firmware version to see if it is the latest one.
• Make sure that you download the correct firmware from download
center.
• Make sure the network of your computer is stable.
If these won’t work, please contact Reolink Support
https://support.reolink.com/.
Night Vision: 30 meters (100ft)
Day/Night Mode: Auto switchover
Hardware Features
IP Camera is not Powering on
Troubleshooting
Camera Video Loss on Reolink PoE NVR
Failed to Upgrade Firmware
If there is video loss on Reolink PoE NVR, please try the following
solutions:
• Please login to the NVR and go to Menu -> IP Channel to check if the
camera is assigned a specific channel number and check the status
of the channel that doesn't show.
• If the camera has the channel number and the channel status shows
Incorrect Password, you may drag bottom slider to the right and enter
the camera password again. Next, click Apply to save the change. If the
status shows Oine, try to connect the camera to other ports on the
Reolink NVR or try with another Ethernet cable.
If your camera is not powering on, please try the following solutions:
• Plug the camera into another POE port on the NVR.
• Try with another Ethernet cable.
• If you have a 12V power adapter, power up the camera with the power
adapter.
If these won’t work, please contact Reolink Support
https://support.reolink.com/.

Reolink B800 Specifications

General

Type	IP security camera
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wired
Form factor	Bullet
Mounting type	Wall
Product color	White
International Protection (IP) code	IP66
Ethernet LAN (RJ-45) ports	1
Sensor type	CMOS
Optical sensor size	1/2.8 \
Effective sensor resolution (thermal module)	3840 x 2160 pixels
DC output voltage	12
Power source type	DC
Power consumption (typical)	8 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Supported network protocols	SSL, TCP/IP, UDP, UPNP, NTP, DHCP, DNS, DDNS
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	30 m
Number of illumination LEDs	18
Total megapixels	8 MP
Video formats supported	H.265
Noise reduction technology	3D noise reduction
Focus adjustment	2.0
Fixed focal length	4 mm
Minimum illumination	0 lx

Weight and Dimensions

Length	192 mm
Weight	485 g
Diameter	66 mm