To Next PageTo Next Page
Need help?Do you have a question about the Reolink C2 Pro and is the answer not in the manual?
General| Cables included | LAN (RJ-45), Micro-USB |
|---|---|
| Number of cameras | 1 |
| AC adapter included | Yes |
| Tilt angle range | 0 - 105 ° |
| Angle of rotation | 355 ° |
| Minimum illumination | 0 lx |
| Total megapixels | 5 MP |
| Maximum resolution | 2560 x 1920 pixels |
| Video compression formats | H.264 |
| Analog signal format system | NTSC, PAL |
| Optical zoom | 3 x |
| Focal length range | 2.8 - 8 mm |
| Maximum aperture number | 1.6 |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 12 m |
| Number of illumination LEDs | 8 |
| Bluetooth | - |
| Frequency band | 2.4 - 5 GHz |
| Number of users | 20 user(s) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Streaming method | Multicast |
| Cabling technology | 10/100Base-T(X) |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | HTTPS, SSL, TCP/IP, UDP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P |
| Type | IP security camera |
| Antenna type | External |
| Antennas quantity | 2 |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Security algorithms | WPA-PSK, WPA2-PSK |
| Alert notification type | |
| Audio system | 2-way |
| Compatible memory cards | MicroSD (TransFlash) |
| Sensor type | CMOS |
| Optical sensor size | 1/2.7 \ |
| Power source type | DC |
| Power consumption (typical) | 6 W |
| Mobile operating systems supported | Android, iOS |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -10 - 55 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 85 % |
| Form factor | Spherical |
| Mounting type | Desk/Wall |
| Product color | Black, White |
Weight and Dimensions| Depth | 95 mm |
|---|---|
| Width | 103 mm |
| Height | 117 mm |
| Weight | 300 g |
Steps for troubleshooting and obtaining technical assistance via the Reolink support website.
Procedure for contacting Reolink for RMA, including submitting a request with order number.
Identifies key physical components of the Reolink camera, such as antenna, ports, and sensors.
Explains the meaning of different states for the Blue and Red LED indicators on the camera.
Diagram and instructions for connecting the camera to the router via Ethernet for initial setup.
Steps to connect and configure the camera using the Reolink App over a local network (LAN).
Steps to add and initialize the camera using the Reolink App remotely over a Wide Area Network (WAN).
Overview of the main sections and features available within the Reolink mobile application.
Instructions for adding and configuring the camera using the Reolink Client software on a local network.
Instructions for adding and configuring the camera using the Reolink Client software remotely.
Steps to scan for Wi-Fi networks, enter credentials, and test the wireless connection via the client.
