To Next PageTo Next Page
Need help?Do you have a question about the Reolink RLC-423 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Day/night mode | Yes |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Optical sensor size | 1/2.7 \ |
| Focus | Motorized |
| Optical zoom | 4 x |
| Focal length range | 2.7 - 12 mm |
| Maximum aperture number | 1.6 |
| Total megapixels | 5 MP |
| Maximum resolution | 2560 x 1920 pixels |
| Video compression formats | H.264 |
| Noise reduction technology | 3D noise reduction |
| Supported graphics resolutions | 640 x 480 (VGA), 2048 x 1536 (QXGA), 2304 x 1296, 2560 x 1440, 2560 x 1920 |
| Cables included | LAN (RJ-45) |
| Pan range | 0 - 360 ° |
| Pan speed | 180 °/sec |
| Tilt angle range | 0 - 90 ° |
| Minimum illumination | 0 lx |
| Wi-Fi | No |
| Number of users | 20 user(s) |
| Networking standards | IEEE 802.3at |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | HTTPS, SSL, TCP/IP, UDP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P |
| Compatible memory cards | MicroSD (TransFlash) |
| LED type | IR |
| Night vision distance | 60 m |
| Number of illumination LEDs | 6 |
| Audio input channels | 1 channels |
| Mobile operating systems supported | Android, iOS |
| DC output voltage | 12 |
| Power source type | DC, PoE |
| Power consumption (max) | 20 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Aluminum |
| International Protection (IP) code | IP66 |
Weight and Dimensions| Height | 201 mm |
|---|---|
| Weight | 1700 g |
| Diameter | 136 mm |
Guide to setting up the camera using a smartphone via the Reolink App.
Guide to setting up the camera using the Reolink Client software on a PC.
Advice and best practices for mounting the camera for optimal performance and durability.
Solutions for when the Reolink camera fails to power on, including power source checks.
Troubleshooting steps for infrared LEDs that are not functioning correctly on the camera.
Steps to resolve issues when the camera firmware upgrade process fails.
Details the device's compliance with Part 15 of the FCC Rules and its operational conditions.
States the device's compliance with essential requirements of EU Directive 2014/53/EU.
