Reolink RLC-423 User Manual

1
2
3
Mount the Camera to the Wall
8English7 English
Drill holes in accordance with the
mounting hole template.
To adjust the camera direction, you may control the
camera to pan and tilt via Reolink app or Client.
NOTE: Use the drywall anchors
included in the package if needed.
Install the mount base with screws
included in the package.
NOTE: Run the cable through the
cable notch on the mount base.
PTZ

Reolink RLC-423 Specifications

General

Type	IP security camera
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wired
Sensor type	CMOS
Number of sensors	1
Optical sensor size	1/2.7 \
Focus	Motorized
Optical zoom	4 x
Focal length range	2.7 - 12 mm
Maximum aperture number	1.6
Total megapixels	5 MP
Maximum resolution	2560 x 1920 pixels
Video compression formats	H.264
Noise reduction technology	3D noise reduction
Supported graphics resolutions	640 x 480 (VGA), 2048 x 1536 (QXGA), 2304 x 1296, 2560 x 1440, 2560 x 1920
Cables included	LAN (RJ-45)
Pan range	0 - 360 °
Pan speed	180 °/sec
Tilt angle range	0 - 90 °
Minimum illumination	0 lx
Wi-Fi	No
Number of users	20 user(s)
Networking standards	IEEE 802.3at
Ethernet interface type	Fast Ethernet
Supported network protocols	HTTPS, SSL, TCP/IP, UDP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Compatible memory cards	MicroSD (TransFlash)
LED type	IR
Night vision distance	60 m
Number of illumination LEDs	6
Audio input channels	1 channels
Mobile operating systems supported	Android, iOS
DC output voltage	12
Power source type	DC, PoE
Power consumption (max)	20 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
Housing material	Aluminum
International Protection (IP) code	IP66

Weight and Dimensions

Height	201 mm
Weight	1700 g
Diameter	136 mm