EasyManuals Logo

Reolink RLC-410W Operational Instruction

Reolink RLC-410W
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
12English
11 English
IP Camera is not Powering on
If you find your camera is not powering on, try the following solutions:
• Please check whether the outlet is working properly or not. Try to
plug the camera into a dierent outlet and see if it works.
• Please check whether the DC adapter is working or not. If you have
another 12V DC power adapter which is working, please use another
power adapter and see if it works.
If these won't work, please contact Reolink Support
https://support.reolink.com
Troubleshooting
IR LEDs Stop Working
If you find the IR LEDs of your camera stop working, try the following
solutions:
• Go to Device Settings and check whether you have enabled Infrared
LEDs. If the LEDs are disabled, please enable them.
• Please go to Live View and check the Day/Night mode. Set the mode to
Auto to activate the IR lights.
• Upgrade your camera's firmware to the latest version.
• Restore the camera to the factory settings and check the IR light
settings again.
If these won't work, please contact Reolink Support
https://support.reolink.com
Specifications
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Operating Humidity: 10%-90%
Weather Resistance: IP66 certified weatherproof
IR Distance: 30 meters (100ft)
Day/Night Mode: Auto switchover
Hardware Features
General
Notification of Compliance
This device complies with Part 15 of FCC Rules. Operation is subject to
thefollowing two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. For more
information, visit: https://reolink.com/fcc-compliance-notice/.
FCC Compliance Statement

Other manuals for Reolink RLC-410W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink RLC-410W and is the answer not in the manual?

Reolink RLC-410W Specifications

General IconGeneral
TypeIP security camera
Antenna typeExternal
Day/night modeYes
Antennas quantity2
Placement supportedOutdoor
Connectivity technologyWired & Wireless
BluetoothNo
Number of users20 user(s)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Networking standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet interface typeFast Ethernet
Supported network protocolsHTTPS, SSL, TCP/IP, UDP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Compatible memory cardsMicroSD (TransFlash)
Ethernet LAN (RJ-45) ports1
Form factorBullet
Mounting typeCeiling/wall
Product colorWhite
Protection featuresWaterproof
International Protection (IP) codeIP66
Cables includedLAN (RJ-45)
Sensor typeCMOS
Optical sensor size1/2.7 \
Fixed focal length4 mm
Total megapixels4 MP
Maximum resolution2560 x 1440 pixels
Video compression formatsH.264
Noise reduction technology3D noise reduction
Supported graphics resolutions640 x 480 (VGA), 2048 x 1536 (QXGA), 2304 x 1296, 2560 x 1440
Minimum illumination0 lx
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Number of illumination LEDs18
Mobile operating systems supportedAndroid, iOS
Security algorithmsWPA-PSK, WPA2-PSK
DC output voltage12
Power source typeDC
Power consumption (max)8 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Length186 mm
Weight425 g
Diameter67 mm

Related product manuals