Reolink RLC-511W User Manual

Reolink Wireless Camera
User Manual
6
2. Setup and Installation
Set up the Camera
Set up the Camera Without Ethernet port
Please follow the steps below to do initial setup for the WiFi cameras without an
Ethernet port via the Reolink App.
1. Connect the power adapter to the camera and wait for it starting up. After
hearing a startup sound, you will hear repeated Ding sounds or "Please run Reolink
App, add the camera and set it up", which means you can scan the QR code on the
camera and start the setup process.
Note:
If you are not sure whether you hear the right sound, you may tap "Demo" to hear
the sample sound. If you couldn't hear the repeated Ding sounds, please reset your
camera.
2. Tap on the icon in the top right corner to start the initial setup.

Reolink RLC-511W Specifications

General

Type	IP security camera
Antenna type	External
Day/night mode	Yes
Antennas quantity	2
Placement supported	Outdoor
Connectivity technology	Wired & Wireless
Form factor	Bullet
Mounting type	Ceiling/wall
Product color	White
Protection features	Waterproof
International Protection (IP) code	IP66
Camera pan control	No
Camera shutter type	Electronic
Minimum illumination	0 lx
Sensor type	CMOS
Number of sensors	1
Optical sensor size	1/2.7 \
Number of effective pixels (H x V)	2560 x 1920 pixels
Optical zoom	4 x
Number of lenses	-
Focal length range	2.7 - 12 mm
Maximum aperture number	1.6
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	30 m
Number of illumination LEDs	24
Total megapixels	5 MP
Video compression formats	H.264
Noise reduction technology	3D noise reduction
Supported graphics resolutions	640 x 480 (VGA), 2048 x 1536 (QXGA), 2304 x 1296, 2560 x 1440, 2560 x 1920
Number of users	20 user(s)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Streaming method	Multicast
Ethernet interface type	Fast Ethernet
Supported network protocols	HTTPS, SSL, TCP/IP, UDP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Compatible memory cards	MicroSD (TransFlash)
Alert notification type	E-mail, Snapshot alert message, Text alert message
DC output voltage	12
Power source type	DC, PoE
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Mobile operating systems supported	Android, iOS
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	186 mm
Width	67 mm
Weight	750 g