EasyManuals Logo

Reolink RLC-511WA User Manual

Reolink RLC-511WA
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
12English
11 English
IP Camera is not Powering on
If you find your camera is not powering on, try the following solutions:
• Please check whether the outlet is working properly or not. Try to
plug the camera into a dierent outlet and see if it works.
• Please check whether the DC adapter is working or not. If you have
another 12V DC power adapter which is working, please use another
power adapter and see if it works.
If these won't work, please contact Reolink Support
https://support.reolink.com
Troubleshooting
IR LEDs Stop Working
If you find the IR LEDs of your camera stop working, try the following
solutions:
• Go to Device Settings and check whether you have enabled Infrared
LEDs. If the LEDs are disabled, please enable them.
• Please go to Live View and check the Day/Night mode. Set the mode to
Auto to activate the IR lights.
• Upgrade your camera's firmware to the latest version.
• Restore the camera to the factory settings and check the IR light
settings again.
If these won't work, please contact Reolink Support
https://support.reolink.com
Specifications
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Operating Humidity: 10%-90%
Weather Resistance: IP66 certified weatherproof
IR Distance: 30 meters (100ft)
Day/Night Mode: Auto switchover
Hardware Features
General
Notification of Compliance
This device complies with Part 15 of FCC Rules. Operation is subject to
thefollowing two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. For more
information, visit: https://reolink.com/fcc-compliance-notice/.
FCC Compliance Statement

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink RLC-511WA and is the answer not in the manual?

Reolink RLC-511WA Specifications

General IconGeneral
BluetoothNo
Ethernet LANYes
Number of users20 user(s)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
User access levelAdministrator, User
Ethernet interface typeFast Ethernet
Supported network protocolsHTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Security algorithmsWPA-PSK, WPA2-PSK
Mobile operating systems supportedAndroid, iOS
Total megapixels5 MP
Maximum resolution2560 x 1920 pixels
Video formats supportedH.264
Audio system2-way
DC output current1 A
DC output voltage12
Power source typeDC
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size256 GB
Ethernet LAN (RJ-45) ports1
LED typeIR
Infra-red wavelength850 nm
Night vision distance30 m
Number of illumination LEDs4
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired & Wireless
Sensor typeCMOS
Optical sensor size1/2.7 \
Form factorBullet
Mounting typeWall
Product colorWhite
Protection featuresWaterproof
International Protection (IP) codeIP66
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Optical zoom5 x
Focal length range2.7 - 13.5 mm
Maximum aperture number3.3
Minimum aperture number1.6
Weight and Dimensions IconWeight and Dimensions
Height72 mm
Length238 mm
Weight838 g
Diameter80 mm

Related product manuals