Reolink RLC-810WA User Manual

EnglishEnglish5 6
1
2
3
4
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a LAN port on your router with an Ethernet
cable.
2. Power on the camera with a power adapter.
WiFi IP Camera
Router
Network Cable
Power Cable
Power Adapter
Set up the Camera
• On Smartphone
Scan to download the Reolink App.
• On PC
Download path of the Reolink Client: Go to reolink > Support > App &
Client.
NOTE: If you are connecting the camera to a Reolink PoE NVR,
please set up the camera via the NVR interface.
Download and Launch the Reolink App or Client software, and follow the
onscreen instructions to nish initial setup.
NOTE: You can now use WiFi instead of the Ethernet cable for network
connection.

Reolink RLC-810WA Specifications

General

Brand	Reolink
Model	RLC-810WA
Category	Security Camera
Language	English