EnglishEnglish11 12
If you fail to upgrade the rmware for the camera, try the following
solutions:
• Check out the current camera rmware and see if it is the latest one.
• Make sure that you download the correct rmware from Download
Center.
• Make sure that your PC is working on a stable network.
If these won’t work, contact Reolink Support .
Failed to Upgrade the Firmware
Specications
Operating Temperature:
-10°C to 55°C (14°F to 131°F)
Operating Humidity: 10%-90%
RLC-810WA Size:
Φ
67 x 187mm
RLC-811WA Size: 80 x 72 x 238mm
(Weight: 485.7g, for RLC-810WA)
Weight: 862.9, for RLC-811WA)
General
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Notication of Compliance
To Next Page
Loading...
Need help?
General
