Reolink RLC-843A User Manual

English English5 6
Ethernet Cable
PoE IP Camer
a
Power Adapter
Router
PoE Injector*
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a LAN port on your router with an Ethernet
cable.
2. Use the power adapter to power on the camera.
NOTE: You can power the camera with a PoE switch, PoE injector, Reolink
PoE NVR or a DC 12V power adapter(not included in the package).
Set up the Camera
• On Smartphone
• On PC
Scan to download
the Reolink App.
Download path of the Reolink Client: Go to https://reolink.com > Support
> App & Client.
Download and launch the Reolink App or Client software, and follow the
onscreeninstructionstonishinitialsetup.
NOTE:
• If you are connecting the PoE camera to a Reolink PoE NVR, please set
up the camera via the NVR interface.

Reolink RLC-843A Specifications

Operating Environment

operating temperature	-10°C~+55°C (14°F~131°F)

Weight and Dimensions

dimension	Φ132.7 x 98.3 mm
weight	750.5 g