Repatha Pushtronex - Securing the Cartridge Door; Step 3: Inject the Medicine; Activating and Placing the Infusor

Page 7
2E
Swing the door to the left. Then, squeeze firmly until it snaps shut. Apply enough
pressure when closing the door and make sure there is a “snap” before going to
the next step.
Squeeze
Tight
Make sure the cartridge fits securely in the on-body infusor before you close the door.
●
Do not close the door if the cartridge is missing or not fully inserted.
●
Do not touch the start button until you have placed the loaded on-body infusor
on your skin.
Important:
After you load the
on
-
body infusor
,
go
to the next step
right away
.
Step 3: Inject
3A
Peel away both green pull tabs to show the adhesive. The on-body infusor is on
when the blue status light flashes.
Right pull tab
Left pull tab
Skin adhesive
“snap”