EasyManua.ls Logo

Repatha Pushtronex - Choosing and Preparing Injection Site

Default Icon
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 8
You must remove both green pull tabs to turn the loaded on-body infusor on. You will
hear beeping and see a flashing blue status light.
Do not pull the skin adhesive backing off the on-body infusor.
Do not touch the skin adhesive.
Do not touch the start button until you have placed the loaded on-body infusor
on your skin.
Do not touch the needle cover area.
Do not place the loaded on-body infusor on your body if the red status light
flashes continuously.
Do not fold the skin adhesive over onto itself.
3B
Choose your
on
-
body infusor
injection
site
.
Only use the outer arm if someone else
is giving the injection.
Stomach area placement Thigh placement
or
Stretch method for stomach Do not stretch for thigh
Important:
Adjust your body posture to avoid skin folds and bulges.
3C
When the blue light flashes, the on-body infusor is ready. Keep the stretch
(stomach area method only). Hold the loaded on-body infusor with the blue light
visible, and place it on your skin. You may hear beeps.
Stomach area placement
or
Thigh placement
The
loaded
on
-
body infusor
will lay flat on your body. Make sure
all of the
adhesive is
attached to your skin. Run a finger around the adhesive edges to secure it.
Make sure
clothing does not get in the way of the loaded
on
-
body
infusor
, and you can
see the blue light at all times.
Do not
move
the loaded
on
-
body infusor
after it has been placed onto
your
skin.