To Next PageTo Next PageWhat to do if Repatha Pushtronex loaded on-body infusor status light continuously flashes red and I hear beeps?
If the Repatha on-body infusor status light continuously flashes red and you hear beeps, discontinue using the loaded on-body infusor immediately. If the infusor is attached to your body, carefully remove it. Contact 1-844-REPATHA (1-844-737-2842) or visit www.REPATHA.com for further assistance.
General| Administration Method | Subcutaneous injection |
|---|---|
| Compatible Drug | Evolocumab |
| Dosage Form | Solution |
| Needle Gauge | 27G |
| Storage Conditions | Store in a refrigerator at 2°C to 8°C (36°F to 46°F). Do not freeze. Protect from light. |
| Battery Life | N/A (Not battery powered) |
Remove the cartridge from refrigeration and allow it to reach room temperature for at least 45 minutes.
Select and clean a suitable skin area with an alcohol wipe, ensuring a firm and flat surface.
Remove pull tabs to activate, then place the infusor on the skin when the blue light flashes.
Press the start button; the injection takes about nine minutes with a flashing green light indicating progress.
Dispose of the used infusor immediately in a sharps container; do not use household trash or recycling.
Addresses red flashing lights, beeping, and what to do if the infusor malfunctions or comes off.
