RESERVE V2 - Page 12

12
Settings
Subwoofer Output: ON or OFF.
Subwoofer Level: -10~+10
Subwoofer Crossovers:
Subwoofer Phase: 0
0
or 180
0
Set High Pass Crossover Frequency & Slope.
Set Low Pass Crossover
Frequency & Slope.
User can touch “<” or “>” to select the desired
frequency Value.
User can touch “<” or “>” to select the
0
0
or 180
0
AMP Turn-on Delay: ON /OFF.
User can set AMP Turn-on Delay is ON or OFF.
User can touch “<” or “>” to select the desired
frequency Value.
Slope： 12dB / 24dB
Front/ Rear Crossover:
Subwoofer Settings:
Slope： 12dB / 24dB
Set Font Crossover
Frequency & Slope.
Set Low Pass Crossover
Frequency & Slope.
User can adjust the source mode (Radio,
USB, BT Audio,Apple CarPlay, Andriod Auto,
SiriusXM) gain value. The gain can be
adjusted from -5~+5 seperatedly.
Maximum Volume Level : ON or OFF.
Maximum Level Adjust: 0~40
Volume Settings:
Source Level Adjust.
Maximum Volume Adjust.
User can set Source Level / Maximum Volume
/ Defult Audio.
SiriusXM