RESERVE V2 - Pre-RIDING; Check list

Pre-RIDING
CARE AND CLEANING
Check list
Appearance
Front
Top
Back
Screen :
Configure the system with your personal
preferences before riding to use features and
minimize distractions while on the road
entirely.
1. Set brightness, background.
2. Configure global presets.
3. Adjust audio settings like EQ, volume, fade,
balance etc. before ridding.
4. Pair, connect and set up phone features
through Bluetooth.
5. Connect USB devices for Apple CarPlay® or
Android Auto®.
6. Selectstation or media
7. Connect the iDataLink Maestro module for
Motorcycle Info and Gauage information
display.
Use only V2 recommended products and
methods to keep the radio, speakers, and other
audio system components clean and in good
condition.
Do not use any abrasives, polishes, or rubbing
compoundsto clean the screen or other
components. Do not use any ammonia-based
cleaners on the net.
The use of other products or methods may
cause damage to components.
Do not use any chemical cleaners or
chemical-containing wipes or cloths.
These can cause damage to the screen
surface.
Gently clean the display glasssurface with a
clean, dry microfiber cloth. Before cleaning, it
is suggested to remove any visible dust, dirt,
sand particles with a gentle compressed
airstream.
3