iGo map Operation
8. Check the settings for road types and change them if
necessary.
1. Tap on the Navigation view to access
the Navigation menu.
2. Tap . Two of the Smart History Items are
displayed in the New Route to... screen for easy
access. You can select one of them as your destina-
tion. .
3. To open all the history items, tap . The
list of recent destinations appears. The list begins
with the three most likely destinations that are
selected based on your previous routes (Smart
History). The rest of the destinations are ordered by
the time they were last selected. If necessary, scroll
the list to see earlier destinations.
4. Select a destination from the list.
5. A full screen map appears with the selected point
in the middle. If necessary, tap the map somewhere
else to modify the destination. The cursor ( )
appears at the new location.
6. Check the settings for road types and change
them if necessary.
Tap to enable or avoid freeways, tap for
roads with Period Charge or Per-use Toll, tap for
ferries, or tap for carpool lanes.
Tap to enable or avoid freeways, tap for
roads with Period Charge or Per-use Toll, tap for
ferries, or tap for carpool lanes.
9. Tap to confirm the destination.
You can also select a nearby point on the map
or tap to select a different destination.
10. The route is calculated and the map appears
showing the entire route, where you can check route
information and route alternatives. Tap to
modify the route parameters, or tap to
start your journey.
3.1.5 Selecting a History item
The destinations that you have used earlier appear in
the History list. Smart History offers these locations
from your previous destinations, using parameters
like the current time of day, the day of week, and the
current location. The more you use the navigation
software, the better it can guess your desired destina-
tion. To select a History item, perform the following
steps:
50
To Next Page
Loading...