iGo map Operation
4.3.2 Sound settings You can modify the following settings:
You might need to avoid freeways when you are driving a slow car or you
are towing another vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to
use the road for a longer period of time. They can be enabled or disabled
separately from toll roads.
Epsilon Linux device includes ferries in a planned route by default. However,
a map does not necessarily contain information about the accessibility of
temporary ferries. You might also need to pay a fare on ferries.
Per-use toll roads are pay roads where there is a per-use charge in the routes
by default. If you disable toll roads, Epsilon Linux device plans the best toll-free
route.
Button Description
Car shuttle trains are used to transports vehicles for a relatively short
distance and they usually connect places that are not easily accessible on a
road, for example, in Switzerland.
Carpool or HOV lanes can be used if a given number of passengers is
traveling in the vehicle. Check whether you are allowed to use carpool lanes
before enabling this road type.
Epsilon Linux device excludes unpaved roads by default. Unpaved roads can
be in a bad condition and you usually cannot reach the speed limit on them.
Disable verbal instructions. This function is enabled by default.
Set whether you want an immediate announcement for the next maneuver after
each turn, or it is enough to receive the information when the turn is near.
Set the verbosity of the voice instructions, that is how much they tell and how
often they speak.
*Minimal: the voice instruction is given once right before the next maneuver.
*Medium: the voice instruction is given when approaching the next maneuver
and it is repeated right before the maneuver.
*Verbose: the voice instruction is given first relatively far from the next maneuver,
it is repeated when approaching the next turn, and it is repeated again right before
the actual maneuver.
Button Function
69
To Next Page
Loading...