What does error EE9 mean on RESKAL LD80 Banknote Counter?
If your RESKAL Banknote Counter displays error code EE9, it means the currency width is longer than 85mm. Remove the indicated bill from the stacker and press the RESET button to continue.
What does EE2 error mean on my RESKAL LD80?
If your RESKAL Banknote Counter shows the EE2 error, it means the MG sensor has detected a suspicious currency. Remove the indicated bill from the stacker and press the RESET button to continue.
What does error EE3 mean on RESKAL Banknote Counter?
If your RESKAL Banknote Counter displays error code EE3, this indicates that the IR sensor has detected a suspicious currency. Remove the indicated bill from the stacker and press the RESET button to continue.
Why is my RESKAL Banknote Counter counting wrong?
If your RESKAL Banknote Counter is counting incorrectly, try the following: * Turn the screw clockwise to increase the friction. * Clean the counting sensor. * Replace the six rubber wheels if they are worn out.
What does EE4 error mean on my RESKAL Banknote Counter and how to fix it?
If your RESKAL Banknote Counter displays the EE4 error, it means the left or right counting sensor is either dirty or broken. Remove the suspicious currency from the stacker, press the RESET button, and then clean or replace the sensor.
What causes error E07 on my RESKAL LD80?
If your RESKAL Banknote Counter displays error E07, it could be due to a strong ambient magnetic field or a non-workable MG. Try lowering the ambient magnetic field or replacing the MG.
Why does my RESKAL LD80 Banknote Counter show E03 error?
If your RESKAL Banknote Counter displays error E03, the code disc might be dirty or loose. Clean or tighten it.
What does error E11 mean on RESKAL LD80?
If your RESKAL Banknote Counter displays error E11, the connector of the front display is loose. Tighten the connector.
Why does my RESKAL LD80 show error E10?
If your RESKAL Banknote Counter shows error E10, it could be due to ambient light being too high or the UV sensitivity light being too high. Try lowering the ambient light or the UV light.
What does error EE6 mean on RESKAL LD80?
If your RESKAL Banknote Counter displays error code EE6, it means a suspicious currency with a different magnetic location is being checked. Remove the indicated bill from the stacker and press the RESET button to continue.
Essential safety precautions and warnings for preventing dangerous situations and ensuring safe operation.
Instructions for environmentally responsible disposal of electronic waste.
Identifies specific keys and indicators for different bill counter models.
Step-by-step guide to accurately count banknotes using the machine.
Utilizing addition and batch features for cumulative and preset counting.
Explains counterfeit detection using Ultraviolet (UV) and Magnetic (MG) technologies.
How the machine detects stacked, torn, or linked banknotes.
Identifies the purpose of each key and indicator on the control panel.
General| Brand | RESKAL |
|---|---|
| Model | LD80 |
| Category | Banknote Counter |
| Language | English |
To Next Page