Need help?Do you have a question about the ResMed Lumis HFT and is the answer not in the manual?
General| Device Type | High Flow Therapy Device |
|---|---|
| Manufacturer | ResMed |
| Modes of Ventilation | High Flow Therapy |
| Humidification | Integrated heated humidifier |
| Oxygen Concentration | 21% to 100% |
| Power Supply | AC 100-240V, 50/60Hz |
| Display | Color LCD |
| Data Management | SD card |
| Operating Temperature | 5°C to 35°C |
| Operating Humidity | 10 to 95% (non-condensing) |
| Noise Level | < 30 dBA |
Crucial safety instructions to read before using the device.
Details indications, intended patient population, contraindications, and adverse effects.
Lists the main parts and accessories included with the Lumis HFT device.
Explains the device's screen, buttons, and status icons.
Important precautions to follow during the device setup process.
Critical warnings and precautions for using supplemental oxygen with the device.
Steps to check the device, tubing, and humidifier for proper function and integrity.
Explains how to use warmup mode to pre-heat the air before therapy.
Steps for starting therapy, including cannula fitting and oxygen setup.
How to recognize when therapy is active and view flow settings.
Information on expected device operation time between humidifier refills.
Step-by-step guide on how to safely stop the therapy session.
Describes the automatic drying mode after therapy and its safety precautions.
How to enter and exit power save mode to conserve electricity.
Guide on changing the device's airflow setting for comfort.
Instructions for modifying the heated air tubing temperature.
How to set the humidifier's moisture output for optimal comfort.
Information on viewing usage hours and summaries of therapy sessions.
Steps for taking apart the humidifier and tubing for cleaning.
Essential safety advice for device maintenance and handling.
Detailed instructions for cleaning the humidifier, tubing, and tubing wrap.
Guidance on inspecting the humidifier, tubing, and filter for damage.
Step-by-step instructions for replacing the device's air filter.
How to put the device components back together after cleaning.
Methods for transferring therapy data wirelessly or via SD card.
Instructions for removing and using the SD card for data transfer.
Tips for safely transporting the Lumis HFT device.
Common issues and their solutions for device operation.
Solutions for common error messages and alert conditions.
Explains system fault errors and recommended actions.
Detailed steps for correctly reassembling the humidifier seal and lid.
Broad safety guidelines for device operation, handling, and maintenance.
Important cautions regarding device use, cleaning solutions, and environmental factors.
Details on operating conditions, electromagnetic compatibility, and classifications.
Specific dimensions, materials, and component details of the device.
Diagram and description of the device's internal airflow path.
Information on device longevity, tubing material, and dimensions.
Details on flow measurement accuracy and altitude adjustments.
Declaration regarding the device's compliance with electromagnetic emission standards.
Guidelines for electromagnetic immunity and recommended environments for use.
Details on radiated RF immunity and recommended separation distances for RF equipment.
Explanation of symbols used on the product and packaging.
Information on the proper disposal of the device and its components.
Details on recommended servicing and the limited warranty for ResMed products.
To Next Page
