Need help?Do you have a question about the ResMed lumis series and is the answer not in the manual?
General| Device Type | Non-invasive ventilator |
|---|---|
| Pressure Range | 4-25 cm H2O |
| Modes | CPAP, S, ST, T, iVAPS |
| Ramp Time | 0-45 minutes |
| Humidification | Integrated heated humidifier |
| Data Storage | SD card |
| Power Supply | AC 100-240V, 50-60Hz |
| Weight | 1.3 kg |
| Operating Altitude | Up to 2, 591 m |
| Heated Tubing | Compatible with ClimateLineAir heated tubing |
| Connectivity | Bluetooth |
| Display | LCD |
Critical safety warnings, indications for use, and contraindications.
Potential side effects that may occur during therapy with the device.
Identifies and labels the physical parts of the Lumis device.
Explains the function of the buttons and icons on the device's control panel.
Step-by-step guide for connecting and preparing the Lumis device for use.
Important warning about overfilling the humidifier.
Procedures to ensure the device and accessories are working correctly before use.
How to start therapy sessions and what to expect on the monitoring screen.
How to set the ramp time to gradually increase pressure for comfort.
Procedure to check and improve mask seal for effective therapy.
How alarms are activated, indicated, and temporarily muted by the device.
Procedures for weekly testing of the device's alarm functions.
Step-by-step instructions for taking apart the device components.
Guidelines for cleaning the humidifier, air tubing, and device exterior.
Steps for putting the device components back together after cleaning.
Common problems and their solutions related to mask fit and humidity.
Solutions for issues like dry mouth, high/low pressure, and screen problems.
Addresses specific alarm messages and their causes/solutions.
General warnings regarding tubing, cords, and device handling.
Safety advice on using ResMed parts and proper mask fitting.
Detailed safety guidelines on device placement, cleaning, and oxygen use.
To Next Page
