Need help?Do you have a question about the ResMed AirSense 10 and is the answer not in the manual?
General| Pressure Range | 4-20 cm H2O |
|---|---|
| Ramp Time | 0 to 45 minutes (5-minute increments) |
| Therapy Mode | CPAP, AutoSet, AutoSet for Her |
| Data Storage | SD card |
| Altitude Adjustment | Automatic |
| Leak Compensation | Yes |
| Device Type | Continuous Positive Airway Pressure (CPAP) Machine |
| Dimensions | 116 mm x 255 mm x 150 mm |
| Weight | 1248 g |
| Humidification | Integrated humidifier |
| Power Supply | 100-240V, 50/60Hz |
| Heated Tubing | Optional ClimateLineAir |
| Connectivity | Wireless |
| Power Supply Voltage | 100-240V |
| Connectivity Option | Wireless |
| Climate Control | AutoSet Climate Control |
Lists pre-existing conditions that may make positive airway pressure therapy contraindicated.
Describes potential side effects that may arise during therapy with the device.
Explains the functions of the buttons and dial on the device's control panel.
How to initiate therapy, including fitting the mask and confirming therapy is active.
How to end therapy, including mask removal and viewing the session summary.
Instructions on how to safely detach, clean, and dry device components like the water tub and air tubing.
Step-by-step guide for removing the old air filter and installing a new one.
Addresses common problems like mask leaks, dry nose, and screen issues with solutions.
To Next Page
