Cleaning
1. Wash the water tub and air tubing in warm water using mild detergent.
Do not wash in a dishwasher or washing machine.
2. Rinse the water tub and air tubing thoroughly and allow to dry out of direct sunlight and/or heat.
3. Wipe the exterior of the device with a dry cloth.
Refer to your mask User Guide for detailed instructions on cleaning your mask.
Checking and replacing your parts regularly
It is important for your comfort and health that you check and replace your parts and supplies
regularly. Replacing your parts and supplies on a regular basis helps ensure you are receiving optimal
therapy and continued comfort.
Refer to your AirSense 10 User Guide for detailed instructions on checking your device. Contact your
care provider for information on your replacement schedule.
Replacement schedule guide:
Every Month Every 3 Months Every 6 Months
Mask cushion or pillow Mask frame
(excludes headgear)
Headgear
Air filters Air tubing Water tub
Register today
myAir™ allows you to access your therapy data and provides personalized support.
Every journey starts with a first step. Register today at ResMed.com/myAir
Serial number Device number
Mask type and size Date of setup
Notes
Water tub for humidification
Air outlet for connecting the air tubing
Dial for navigating and changing options
Home button for returning to the
Home screen at any time
Start/Stop button for starting therapy
Quick start guide
English
ResMed Ltd
1 Elizabeth Macarthur Drive
Bella Vista NSW 2153 Australia
DISTRIBUTED BY
ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA
ResMed (UK) Ltd 96 Jubilee Ave Milton Park Abingdon Oxfordshire OX14 4RW UK
See www.resmed.com for other ResMed locations worldwide. For patent information, see www.resmed.com/ip.
AirSense and myAir are trademarks of ResMed Ltd. © 2014 ResMed Ltd. 378310/3 2014-07
378310_airsense10_patient-qsg_amer_eng.indd 1-2 15/07/2014 9:27:43 AM
To Next Page
Need help?
General
