ResMed VPAP ST Information Guide

7
English
Power level (CPAP mode)
With SlimLine tube: 34 dBA with uncertainty of 2 dBA as measured according
to ISO 17510-1:2007
With Standard tube: 35 dBA with uncertainty of 2 dBA as measured according
to ISO 17510-1:2007
With either SlimLine
or Standard tube and
H5i:
36 dBA with uncertainty of 2 dBA as measured according
to ISO 17510-1:2007
Supplemental
oxygen
Recommended maximum supplemental oxygen flow: 15 L/min
Air tubing technical specifications
ClimateLine SlimLine
ClimateLine
MAX
Standard 3 m
Maximum
recommended
pressure
25 cm H
2
O 25 cm H
2
O 25 cm H
2
O 25 cm H
2
O 25 cm H
2
O
Inner diameter
15 mm
15 mm
19 mm
19 mm
19 mm
Length 1.98 m 1.8 m 1.91 m 2.0 m 3.0 m
Material Flexible
plastic and
electrical
components
Flexible plastic Flexible plastic
and electrical
components
Flexible
plastic
Flexible
plastic
Heated tubing
temperature cut-
out
≤ 41°C ≤ 41°C
Notes:
• The manufacturer reserves the right to change these specifications without notice.
• The temperature and relative humidity settings displayed for ClimateLine / ClimateLine
MAX
are not
measured values.
• Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9 or H5i.
• The electrical connector end of the heated air tubing is only compatible with the H5i air outlet and
should not be fitted to the device or mask.

ResMed VPAP ST Specifications

General

Device Type	Bi-Level Positive Airway Pressure (BiPAP) device
Sound Level	26 dBA
Data Storage	SD card
Power Supply	100–240V AC, 50–60Hz, 2.0A
Therapy Modes	CPAP, S, T
Humidification	Optional integrated heated humidifier
Alarms	Low pressure, high pressure, power failure
Humidifier	Optional integrated heated humidifier
Modes	Spontaneous, Timed, Spontaneous/Timed (S/T)