Resolution RE524X User Manual

Installation Guide: RE524X Wireless to Wireless Translator™
• Selectable wireless panel and sensor compatibility
• Translator or repeater operation
• Rechargeable backup battery
• Cover tamper
• Certied to UL1023 and ULC1023
PANEL ENROLLMENT
(For full sensor enrollment instructions, refer to Advanced Setup, step 3)
A Enroll Translator into Panel.
• Trip the translator tamper to enroll the translator into the panel (For Honeywell® and 2GIG® panels select loop 1).
-or-
• Enter ID into panel. The translator’s ID is printed on the bar code label.
B Enroll Sensors into Panel
• With the translator cover open, trip each sensor to enroll it into to the panel.
• Finish setup of each sensor at the panel.
Features
FINISH
A With the translator cover open, perform a panel sensor test.
B Close the cover. Test and verify proper operation of the sensors at the panel.
C Cut the lock wire to lock the translator (For more information on locking, refer to Advanced Setup, step 4).
D Secure cover with screw.
DIAGRAM
Wall mounting
screw locations
MOUNT AND WIRE
A Select a mounting position and location.
B Connect the power supply to the translator.
1
2
3
4
Quick Setup
TRANSLATOR CONFIGURATION
A Select the brand of panel that the translator must
talk to using the “PANEL SELECT” knob.
B Select the brand of sensors that the translator must
listen to using the “SENSOR SELECT” knob.
C Translator conguration
a) Press the “CONFIGURE” button to enter conguration mode.
b) Tamper or trip all sensors to be translated.
c) Press the “CONFIGURE” button to exit conguration mode.
(Mounting hardware not included. Use two
#4 or # 6 screws for mounting )
INSTALLATION VIDEOS and PRODUCT INFORMATION: http://resolutionproducts.com/products/translators-repeaters/universal-translator/

Resolution RE524X Specifications

General

Brand	Resolution
Model	RE524X
Category	Electronic dictionary
Language	English

Summary

Quick Setup Guide

Mount and Wire Translator

Instructions for mounting the translator and connecting its power supply.

Configure Translator Settings

Select panel and sensor brands and enter configuration mode.

Enroll Translator and Sensors

Steps to enroll the translator and its sensors into the security panel.

Final Setup and Testing

Perform sensor tests, secure the cover, and lock translator settings.

Advanced Setup Procedures

Advanced Mounting and Wiring

Detailed instructions for translator mounting and power connection.

Advanced Translator Configuration

Detailed steps for configuring translator for specific panel and sensor brands.

Advanced Panel Enrollment

Detailed procedures for enrolling translator and sensors into various panel types.

Final Translator Operations

Perform Panel Sensor Test

Conduct a sensor test with the translator cover open for signal verification.

Verify Translator Operation

Confirm proper operation of all sensors at the panel after closing the cover.

Translator Locking Procedure

Secure translator configuration by cutting lock wire and confirming settings.

Specifications and Notices

Key Fob Mapping

Table mapping panel functions to key fob actions across different brands.

Product Specifications

Details on physical, environmental, power, and wireless radio characteristics.

Certifications and Notices

Information on ETL/UL certifications, FCC/IC compliance, and product notices.