HeliLink can be used to enroll sensors by scanning their barcodes.
Smoke Alarms should be installed in accordance with Chapter 2 of “ANSI/NFPA
72: National Fire Alarm and Signaling Code” (National Fire Protection Association,
Batterymarch Park, Quincy, MA 02169) when installed in the USA. Smoke alarms
installed in Canada should be installed in accordance with “Standard for the
Installation of Residential Fire Warning Systems, CAN/ULC-S540”.
(Multiple Sleeping Areas)
KITCHEN
BEDROOM BEDROOM
LIVING ROOM BEDROOM
DINING
BEDROOM
Smoke Alarm Placement
DINING
KITCHEN
BEDROOM BEDROOM
BEDROOM
LIVING ROOM
(Single Sleeping Area)
Required Smoke Alarm
Optional Smoke Alarm
NOTE: Regulations pertaining to smoke alarm
installations vary. Contact your local fire
department for more information.
BEDROOM
KITCHEN
HALLBEDROOM
GROUND
FLOOR
BASEMENT
(Multi-Floor Home)
Should the battery need replacing, remove the cover, disconnect the old battery,
and connect a new battery. The battery connector is polarized and can be inserted
only one way into the Helix receptacle.
2:45 PM
< Zones
Manual Entry
RF Enroll
BTLE Enroll
< Zones
To Next Page
Loading...