Basic Restaurant
11
Program 1 ‘Basic’ Program 2 ‘Restaurant’
Changing program
The “P” button (10 on page 9) is used to switch between the pro-
grams that your hearing care professional has programmed into
your hearing instruments. The name of the program displayed
can be configured by your hearing care professional. Each time
you press the “P” button the program advances one step, return-
ing back to program 1 at the end of each cycle (e.g. 1, 2, 3, 1).
Each change in program is accompanied by beep tones in both
hearing instruments, if not disabled by your hearing care profes-
sional during the fitting, and the program currently in use is shown
in the display. For optimal performance it is recommended that
both instruments be set to the same program.