Resource ALTEA Work 90 - Safely Operating Your Altea 90;120 Work Bed (Continued); Closing the Wall Bed

SAFELY OPERATING YOUR
ALTEA 90/120 WORK BED
1
2
3
4
CLOSING YOUR ALTEA 90/120 WORK WALL BED
Remove bed pillows and tuck bedding
in on all sides around and under the
mattress.
Latch both mattress straps over the
bedding.
Continue to lift bed frame as you walk
forward toward wall. Push bed frame
into structure until you hear both safety
latches above the legs “click” into place.
This indicates that the bed is now fully
locked.
Release one of the safety latches. Stand
at the foot of the bed at either corner.
Using one hand, apply gentle downward
pressure on the bed while pushing down
on one of the release levers with the
other hand. You do not have to release
both latches.
Once properly released, the bed will be
easy to lift. If you feel any resistance, let
go and repeat step 2.
Oh, and did we mention: Do not attempt to
close the bed without releasing the safety
latch? I thought so.
Have a great day!
Do not attempt to close the bed without
releasing the safety latch.
The all-important
Safety Latch
NOTE: Your Altea 90/120 Work is designed so that most bedding can remain on the bed
when closed. If you experience diculty closing the bed, your bedding might be too thick.
28