What to do if RESQTEC FX Tools blades will not open or close?
If the RESQTEC Tools blades won't open or close when connected to a power unit, ensure the product is correctly connected to the power unit. Also, check that the correct valves on the power unit are open and that there's sufficient hydraulic oil and gasoline in the power unit.
Highlights potential hazards, equipment damage, and safety alert symbols.
Details general safety precautions, training requirements, and protective gear.
Provides crucial safety labels and precautions before product installation and use.
Explains the importance of matching the manual to the specific product and serial number.
Lists the specific product types covered by this manual.
Expresses gratitude for choosing Resqtec and outlines manual purpose.
Describes Frontliners as double-acting hydraulic tools for rescue operations.
Identifies key components of the FX2 Frontliner with a diagram.
Presents an overview of available Frontliner models and accessories with images.
Guides on checking equipment for damage upon receipt and initial inspection.
Details pre-operation checks for blades, dead-man's valve, handles, and covers.
Explains how to operate the Frontliner using the dead-man's control handle.
Discusses the 350 bar operating pressure and interoperability with other systems.
Describes the NEO1 quick action couplers and pre-usage checks.
Provides step-by-step instructions for connecting the NEO1 coupler.
Details the procedure for safely disconnecting the NEO1 coupler.
Outlines the steps for connecting the STD coupler.
Explains how to disconnect the STD coupler.
Guides on releasing pressure build-up for easier connection.
Covers connecting the hydraulic hose and operating the product's blades.
Instructions for removing and placing the FX2 model's spreading jaws.
Details attaching and detaching pulling jaws, chains, and shackles.
Lists technical specifications in the SI metric system for various models.
Lists technical specifications in the Imperial system for various models.
Details the cutting capabilities based on EN and NFPA classifications.
Technical drawings with SI system dimensions for FX2, FX4-Fj, FX6-Fj, and G4WX.
Technical drawings with Imperial system dimensions for FX2, FX4-Fj, FX6-Fj, and G4WX.
Details actions to take for maintenance immediately after product use.
Outlines regular maintenance tasks for frontliners and couplers.
Emphasizes the need for annual inspection by a trained service technician.
Provides guidelines for proper storage of the equipment and accessories.
Information on reusing parts, disposing of oil, and recycling the product.
Lists general warnings, limitations on use, and prohibited cutting materials.
Warns about blade twisting during cutting and the potential hazards.
To Next Page
General