Retekess TD161 - Instruction Description; Common Troubles and Solutions

4
Instruction Description
Common Troubles and Solutions
Instruction Buttons Display Function
Programming Mode P 999 CALL P999 To enter programming mode
History H H + Number Check recent 10 call records.
Mute Mode
999 Call
S999 All charging pagers switch to MUTE mode.
Quit Mute Mode
000 Call
S000 All charging pagers quit MUTE mode.
Call pagers
[Number] Call
C+[Number]
The corresponding pager begin to remind.
Trouble
Analysis
Solution
The pager can’t be
programmed.
1.The pager is not being charged.
2.Charging is more than 20s.
1. Make sure the pagers are well charged.
2. Try again within 20s after recharging.
The pager can’t be
One-Call-Off
The pager is not being charged. Make sure the pagers are well charged and
try again.
The pager doesn’t
response.
1. The pager is out of power.
2. Out of call range.
1.Use after full charged.
2.Use within range of call.