Retekess TD164 - Functional Diagram; Technical Parameters; User Instructions; Initial Setup & Charging

2.Parameter
3.Instructions for Use
1.Functional Diagram
Host Pager
Input Power DC12V/2A Battery Li-ion 3.7V 300mAh
Frequency
433.92MHz
Frequency
433.92MHz
Transmit Power 26dBm Standby Current <12mA
Standby Power <120mW Standby Duration 10h
Modulation Type
FSK
Sensitivity
-115dBm
Max Capacity 998 pagers Max Distance 800m-1000m
Prompt Mode
Vibration/Buzzer/Flashing
Dimensions
190*130*40mm
DC 5V/2A * 2
Prompt Time
30s
Output
A.Before using
Wiring:Host connects to power source via adapter.charging base connects to host via Type-C cable.
The pager is placed on the charging base.The charging indicator on the pager lights up to indicate
normal status.Charging indicator information:
Flashing Charging
Always on Full Charged
B.Operating instruction
CALL mode is the default mode.Continuously press Delete button( ← ) to return Call Mode while in other
mode.C--is displayed in CALL mode.
Input the number and press CALL button to call the corresponding pager.
1