Retekess TR113 - Page 4

After shutting down the APP inteace, the radio will display
the time status. Press and hold the radio [ ] key, the APP
connection symbol [ ] on the main frequency LCD
disappears, and you can quickly exit the APP.
Button function description
Press the [BW-DM] key to set the bandwidth value of each
band; In FM or SW receiving mode, press and hold the [BW-
DM] button. You can see from the main screen of the radio:
when the receiving demodulation mode ashes, press the
[BW-DM] button again to switch;
in FM mode , long press the [BW-DM] key, the demodulation
mode switches to -ST/WFM;
in SW mode, long press the [BW-DM] key, the demodulation
mode switches to -AM/LSB/USB.
VOL+: Volume increases
VOL-: Volume decreases
ITEM
Symbol
14
Music playback mode switching button: Press this button
lightly to switch the playback mode between "TF card/
Bluetooth/
15
6
7
12
13
Station retrieval key: In the numeric keyboard area, directly
click the station address number and press the [Enter] key
to conrm. If "Present--" is displayed, it means it is an empty
station.
In the TF card playback mode, directly click the song number
in the numeric keyboard area, and press the [Enter] key to
conrm.
METE
FM frequency modulation mode: select the frequency range
of FM reception;
AM medium wave mode: select the step value of medium
wave; in the SW showave/VHF ve high frequency/UHF
ultra high frequency/AIR aviation band, select meter wave;
V-UHF
Switch key for VHF ve high frequency/UHF ultra high
frequency/AIR aviation band/CB city band/WB Noh
American weather band;
Tap to activate the alarm function, tap again to cancel the
alarm function.
Long press to select: alarm clock mode/power-on mode.
Click any mode to enter the alarm time setting (select the
alarm to be the "beep..." sound when the radio reaches the
power-on time, select the power-on to be the radio to turn
on when the power-on time is reached)
BW-DM
Plus and minus keys: frequency increment & decrement/
select songs/save stations, retrieve station address number
selection;
ANT-ATT
Choose from two modes: sho-range LOCAL and long-range
DX;
press and hold the [ANT-ATT] button, and when the LOCAL/
DX characters ash on the main screen, tap the [ANT-ATT]
button again to switch between the two modes.
VOL+-
BAND
Tap to switch between FM (frequency modulation), MW
(medium wave), LW (long wave), and SW (sho wave) bands;
Press lightly to turn on, long press to turn o;
MUTE
Long press the [MUTE] key to enable the mute function.
When mute, the [MUTE] symbol ashes.
Long press the [MUTE] key again to cancel the mute function.
LOCK
Press and hold the [LOCK] button to lock the radio. Press and
hold the [LOCK] button again to unlock.
Mobile APP connects to TR113 radio ent button
Device calibration time key (can correct the time displayed
on the radio with one click, consistent with that of the mobile
phone)
Tap to enter set sleep time
REC
In radio mode, tap to enter radio mode and peorm internal
recording.
Before recording, please inse the TF card into the radio and
then tap it to enter the recording mode. Tap again to exit
recording (recorded les can be played in the TF card)
02
MUSIC
1 2
3
4 5 6
7 8 9
ENTER