4. Press [C/16] key to confirm and save CALL Channel.
Set/Cancel TAG Channels
Set TAG (★) for channels need to be scanned, cancel TAG (★) for channels which are no need. The untagged
channels will be skipped during the scanning.
● Set/Cancel Single TAG Channels: Hold [MENU] key for 1 second to set/cancel the current channel as TAG
channel, “★” displayed for channels which are tagged.
● Set/Cancel All TAG Channels: While Power OFF, hold [LOCK] key and press [ ] key to power ON, all TAG
channels will be canceled in the selected channel group. Repeat the above operations to set all channels as TAG
channels.
Scan Operation
Set scan resume timer in the menu mode.
1. Enter “ ” menu item to select Scan, exit menu mode to start Normal Scan or Priority Scan.
● “SCAN” flashes on LCD.
● “16” appears on the sub channel readout during priority scan.
● The scan pauses when a signal is received (The resume time can be set in the set mode).
● Channel 16 is monitored in priority scan.
● Press [▲] or [▼]to change the scan direction.
2. Press [MENU] key again, or press [PTT]/ [C/16]/ [ ] to stop scanning.
Watch Operation
This radio contains Dual/Tri Watch, can be selected in the menu mode.
Dual watch: Watch and monitor in turns between the current channel and Channel 16.
Tri watch: Watch and monitor in turns among the current channel,
Channel 16 and CALL Channel.
1. Enter “ ” menu item to select Watch, exit menu mode to start Dual Watch or Tri Watch.
● “DUAL” flashes during Dual Watch; “TRI” flashes during Tri watch.
● A “BEEP” sound emits when signal is received on Channel 16.
● Tri Watch switches to Dual Watch when signal received on CALL Channel.
2. Press [MENU] key, or press [PTT]/ [C/16]/ [ ] to stop watch and motoring.
Vibration Water Draining Function
The Vibration Water Draining Function helps to drain the water away from the loudspeaker housing, which can
prevent water ingress to affect the loudspeaker voice quality.
● When standby, press [MENU] key, then press [ ] key to activate this function.
● A deep sound emits for 10 seconds to drain water. Any key operation is invalid when vibration water draining.
Menu Operation
Menu operation method as follows：
1. Press [MENU] key to enter menu mode. Press [▲]/[▼] key to select the desired menu item.
2. Press [MENU] key to enter setting status. Press [▲]/[▼] key to select the desired setting.
3. Press [C/16] key to exit menu mode.
Items
Options
Display
Beep Tone
Channel Group Selection
Function Selection
Weather Alert
Priority Scan
Scan Resume Timer
Dual/Tri-Watch
Backlight Level
of（OFF）/on（ON）
USA/INT/CAN/WX
Of/SCAN/DUAL
of（OFF）/on（ON）
of（OFF）/on（ON）
of（OFF）/on（ON）
d-（Dual Watch）/t-（Tri Watch）
of（OFF）/1/2/3
4
To Next Page
Loading...
Need help?
General