Retevis RT-35 - Walkie-Talkie Operation; Using the Walkie-Talkie Modes; Selecting Channels

BATTERY LOW POWER TIPS
When the unit detects a low battery in the talk mode and
standby mode, Power indication“ ” start Flashes.
Remind you to recharge.
USING THE WALKIE-TALKIE
This unit can set the functions in the intercom mode.
1、Press and hold the power / menu button about 3 seconds,
the unit will automatically power on to speak mode, The
display shows the icon," " under intercom mode.
Exit intercom mode, press and hold the power / menu
button about three seconds, then the unit emits a long
"beepa" sound (In a short "beep" sound after). The clock will
be display only in standby mode.
Repeat above steps from standby mode to enter intercom
mode.
2、 Press the power / menu button to access the function
settings.
Activated icon will begin blinking.
Press repeatedly this button, explore other menu
functions until back to the intercom mode. it will issue a
"beep" sound when you press the button every time.
3、After activate a function icon, press the up or down key to
select menu options.
4、Press PTT-button to save and back to standby.
After the function icon flashes stoppe d , the unit
automatically save the settings and return to standby.
SELECT CHANNEL
This radio have multiple channels, channel selection
method is as follows:
1、When standby, press the power / menu button again until
the current channel starts flashing on the LCD screen, enter
the channel setting status
2、Press the up or down key to select the channel number
3、 Press the Power / Menu button to save the settings and
return to the receiving status
4、Press the PTT-button to save and return to the receiving
status.