Retevis RT23 - Remote Control and Signaling; Remote Stun;Kill Operations; DTMF Code Transmission

Remote Kill/Remote Kill wakeup
Transmit remote kill code (such as 1234), transmit 1234 code then that transceiver can not
transmitting and receiving.
To wakeup that transceiver , only need to transmit remote kill code 1212+# code.
Transmit DTMF Code Manually
This transceiver can transmit DTMF code manually, when this transceiver is transmitting,
input 0-9ABCD*# on the keypad, then the corresponding codes will be transmitted. PF1
corresponds A code,【 】key corresponds B code, key corresponds C code,
and key corresponds D code
Transmit stored DTMF code
Press key 2s or short press programmed PF1/PF2, enter DTMF code groups, rotate
channel knob to select DTMF code groups, press PTT to transmit.
【 】
【 】
【 】
VF
O
C
al
l
M
R
S.Band
B
A
MENU
Lock
V
F
O
C
al
l
M
R
Remote Stun/Remote Stun wakeup
Transmit remote stun code (such as 1212), transmit 1212 code then that transceiver can be only receiving
To wakeup that transceiver , only need to transmit remote stun code 1212+# code
27
STEP
5.00K
DS
01
NO.Menu Name
Enter Menu
Setting
Screen Display
Rotate Channel Knob to
select parameter(notes)
Confirm
Return
State
1010101010101010101010