10
10.Scanning for an active radio channel
·Press and hold the -button (12):The ‘Scan’ function indicator (17) will
appear on the screen and the channel (18) will scan continuously from
1 to 8/20/22.
·Press the ▼ -button (7) to start the channel scan from 8/20/22 to 1.
Once an active channel is found, the scanning will stops and you can listen to
the transmission.
When the transmission on the found channel stops, the scanning will resume
automatically.
NOTE: If you press the PTT button (15) while listening to a found channel,
the Radios will go back in stand-by mode on the found channel.
11. Call Tones
A call tone alerts others that you want to start talking.
11.1 Setting the Call Tone
The walkie talkies have 10 call tones.
·Press the MENU-button (11) four times, “CA”is displayed and the current
call toneis flashing.
·Press the ▲-button (4) or the▼-button (7) to change to another Call Tone.
·Press the PTT-button (15) to confirm and return to stand-by Mode.
11.2 Sending a call tone
Press the -button (12) briefly. The call tone will be transmitted on the
set channel.
To Next Page
Loading...
