Retevis RT616 - Menu Item List and Configuration

05
Select the RX CODE
1) Press the [MENU] button to enter into the MENU mode. Press the [▲]/[▼] button to select 10 and display
RXCODE;
2) Press the [MENU] button to enter the MENU item;
3) Press the [▲]/[▼] button to select the required code: OFF/67.0-754N;
Note: CTCSS: 67Hz-254.1Hz (50 group) DCS: 023N-754N/023I-754I (104 group)
4) Press the [▲]/[▼] button to select the CTCSS/DCS;
5) Press [MENU] button to confirm;
6) Press [PTT] or [MONI] button exit to the menu mode.
Select the TX CODE
1) Press the [MENU] button to enter into the MENU mode. Press the [▲]/[▼] button to select 02 and display
TXCODE;
2) Press the [MENU] button to enter the MENU item;
3) Press the [▲]/[▼] button to select the required code: OFF/67.0-754N;
Note: CTCSS: 67Hz-254.1Hz (50 group) DCS: 023N-754N/023I-754I (104 group)
4) Press the [▲]/[▼] button to select the CTCSS/DCS;
5) Press [MENU] button to confirm;
6) Press [PTT] or [MONI] button exit to the menu mode.
Squelch level
1) Press the [MENU] button to enter into the MENU mode. Press the [▲]/[▼] button to select 03 and display
SQL;
2) Press the [MENU] button to enter the MENU item;
3) Press the [▲]/[▼] button to select: 0/1/2/3/4/5/6/7/8/9. (The lowest level is 0, The highest level is 9, Usually
Menu Item List
06
Menu
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Display Character
RXCODE (Receive CTCSS/DCS)
TXCODE (Transmit CTCSS/DCS)
SQL (Squelch Level)
LIGHT (Backlight)
BEEP (Keyboard Beep)
VOX
PWR (Transmission Power)
TDR (Dual Standby)
W/N (Wide Band and Narrow Band)
SAVE (Power Saving Mode)
TOT (Transmission Time Limit)
BCLO (Busy Channel Lockout)
RING (Ringtone)
WEATHE (Wheather forecast)
VOICE (Language)
Set Options
OFF, CTCSS, DCS
OFF, CTCSS, DCS
0-9 (Factory set to level 3)
OFF/ON Key
OFF/ON
OFF / 1-5 level
HIGH/LOW
ON/OFF
WIDE/NARROW
OFF/ON
OFF/30/60/90/120/150/180S
OFF/ON
OFF, 10 ringtone are available
OFF/ON
OFF / CHI (Chinese) / ENG (English)
Menu Item List