After you have made any adjustment to your electric bicycle, check that all nuts and
bolts are securely tightened and cables are free from kinks and fixed securely to the
electric bicycle frame. Every six months, your electric bicycle should be professionally
checked to ensure that it is in correct and safe working order. It is the responsibility of
the rider to ensure all parts are in working order prior to riding this electric bicycle.
3.2 What Never To Do When Riding
NEVER ride without wearing an approved helmet, which must meet USA/ European
(CPSC/EN) standards. Always comply with the local laws and ordinances.
NEVER ride on the same side of the road as oncoming traffic.
NEVER carry a passenger, this bicycle is designed for a single rider only.
NEVERhang item(s) over the handlebars, this could interfere with steering or
catch in the front wheel causing a crash.
NEVER hold on to another motor vehicle or bicycle.
NEVER ride too close to another vehicle - keep your distance and awareness.
WARNING! Wet Weather Riding: Your bike's brakes do not work as well under wet
or icy conditions as they do under dry conditions. The braking distance in wet weather
will be longer than that in dry conditions. Take special precautions in wet weather to
assure safe stopping. Ride slower than normal and apply your brakes well in advance of
anticipated stops.
WARNING! Night Riding: Do not ride at night. If you have to be on your e-bike at
night or in low-light conditions, always comply with laws and regulations (local and
otherwise) for bicycle lighting. Use approved headlights (white), taillights (red) properly
affixed to your e-bike in addition to all-around reflectors. For additional safety, wear
Yightcolored clothing with reflective stripes, or safety yellow or safety orange clothing.
Check that the reflectors are firmly secured in the correct position and clean and not
obscured. Damaged reflectors must be replaced immediately.
4
To Next Page
Loading...
