EasyManua.ls Logo

RevJams BTS400 - Advanced Functions; Hands-Free Call Management; AUX Input and Switching

RevJams BTS400
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
5)
Make sure your phone is within 33ft (10M) from the device without any barriers
between them. Now you can play the music on your mobile phone via the
device;
6). Press the “ ” button to play/pause the music. Press the “ / ” or “ /
” button to select previous/next track.
Bluetooth connection mode:
If the Bluetooth icon does not appear on your mobile phone screen before use,
please activate the Bluetooth connection by following these steps:
(1) Select “ BTS400 ” from Bluetooth devices list and click Connect;
(2) Select “Pairing” on your mobile phone;
(3) To disconnect the Bluetooth, press and hold the “
” button, or select
Disconnect on your mobile phone, the Bluetooth will go to standby mode. At
this time you can connect to another mobile phone for Bluetooth device.
Hands free function:
Answer a call:
In Bluetooth mode, when there is an incoming call, you will hear the ring tone
through the speaker of the device. At this time press the “ ” button to
answer the call.
End a call:
In hands free state, press the “ ” button the end a call and return to music
playback mode.
Reject a call:
When there is an incoming call, press and hold the “ ” button for more
than 3 seconds to reject the call.
AUX IN mode:
When the device is powered on, if you connect a 3.5mm AUX audio cable to the
AUX IN port on the device, it will switch to AUX IN mode. In such case, connect