What to do if I can’t connect to a paired device in Bluetooth mode on my Revo Supersignal?
To resolve connection issues in Bluetooth mode, first, select 'DISCONNECT' from the Bluetooth menu on your Revo Radio. Then, delete the radio's profile from your Bluetooth device. Finally, re-pair the devices as you normally would.
Why is the Bluetooth audio quality so poor on my Revo Supersignal?
If you are experiencing poor audio quality in Bluetooth mode on your Revo Radio, it may be due to your Bluetooth device being out of range or electromagnetic interference. Try moving your Bluetooth device closer to the Revo Radio and away from other sources of interference, such as other Bluetooth devices or wireless routers.
What to do if I can’t connect to a paired device via Bluetooth on my Revo Radio?
To resolve connection issues with a paired device in Bluetooth mode on your Revo Radio, select DISCONNECT to delete the device's profile, then re-pair the devices as normal.
Why does my Revo Supersignal Radio have FM hiss, DAB burbling/cut-out, or show 'No stations available'?
If you are experiencing hissing on FM, burbling, intermittent signal, or cut-out on DAB, or if DAB indicates 'No stations available' on your Revo Radio, the issue is likely due to low signal strength. To solve this: * Check and reposition the antenna. * Move the radio to a different location. * Rescan to find only local, high-strength stations. * For DAB specifically, verify local coverage at www.ukdigitalradio.com/coverage.
How to fix FM hissing or DAB burbling on Revo Radio?
If you're experiencing hissing on FM, burbling/intermittent sound or cut-outs on DAB, or a 'No stations available' message on your Revo Radio, it's likely due to low signal strength. Try moving the radio to another location and rescanning for local, high-strength stations. For DAB issues, you can also check local coverage at www.ukdigitalradio.com/coverage.
General| Radio type | Portable |
|---|---|
| Tuner type | - |
| Supported radio bands | DAB, DAB+, FM |
| Radio Data System (RDS) | Yes |
| RMS rated power | - W |
| Subwoofer driver diameter (imperial) | 3.5 \ |
| Display type | OLED |
| Headphone outputs | 1 |
| Product color | Silver, White |
| Amplifier class | D |
| Apple docking compatibility | Not supported |
| Card reader integrated | No |
Weight and Dimensions| Depth | 140 mm |
|---|---|
| Width | 135 mm |
| Height | 210 mm |
| Weight | 2300 g |
Provides phone numbers and email addresses for technical assistance and product support.
Lists all components expected to be found in the Supersignal packaging.
Identifies and describes the controls and features located on the front of the unit.
Identifies and describes the ports and connections found on the rear of the unit.
Details the specific function of each button on the Supersignal remote control.
Guidance on choosing the correct power adaptor for different regions.
Steps for connecting the power supply and extending the antenna for first use.
Explains the four directional functions of the joystick controller.
Details how to navigate menus and switch between operating modes.
Ensuring the antenna is extended and the initial automatic station scan.
How to perform full scans and remove unavailable stations from the list.
How to navigate the station list and select your desired DAB station.
Storing and recalling favourite DAB stations using front panel or remote presets.
Cycling through displayed information like programme type, signal strength, and bitrate.
Adjusting audio compression to balance quiet and loud sounds in noisy environments.
Steps for tuning, scanning, and selecting FM radio stations.
Storing and recalling favourite FM stations using front panel or remote presets.
Adjusting scan settings and audio output preferences like mono or stereo.
How to play audio from external sources (e.g., MP3 players) via the Aux-In port.
Step-by-step guide for pairing smartphones, tablets, and laptops with the Supersignal.
Details on entering the passkey '0000' if required during the Bluetooth pairing process.
Controlling music playback directly from the source device or using the remote control.
How to pair additional devices and information on memory limitations.
Explanation of aptX technology for enhanced CD-quality audio streaming.
Guide to configuring alarm time, duration, source, frequency, and volume level.
How to stop the alarm when it is sounding using designated buttons.
How to activate the touch-snooze feature and set snooze durations.
Information on using the sleep timer feature to automatically switch to standby.
Setting the timer for the Supersignal to automatically switch into standby mode.
Adjusting bass and treble settings for custom audio output.
Manually setting time/date, auto-update options, and display format.
Automatically updating time/date from DAB or FM signals when available.
Setting contrast levels for the OLED display in standby and power-on modes.
Changing the radio's display language from the available options.
Restoring the Supersignal to its default factory settings and erasing personal data.
Instructions for performing software upgrades when requested by technical support.
Locating and identifying the current software version of the radio.
Solutions for common problems like hiss, burbling, intermittent reception, and no stations.
Troubleshooting Bluetooth connection problems and poor audio quality.
To Next Page
