Need help?Do you have a question about the REVV Generator 100 P and is the answer not in the manual?
Step-by-step guide for connecting and powering on the amplifier safely and correctly.
Details about the 1/4" instrument cable inputs, active and passive, for guitar signal.
Description of the clean channel, its controls, and sound characteristics.
Description of the crunch channel, its controls, and sound characteristics.
Details on Channel Two, including gain, EQ, aggression, and contour controls.
Explanation of the two master volume controls, their toggling, and MIDI programmability.
Description of the Presence and Depth controls, their impact on tone, and global nature.
Explanation of accessory functions like Masters, Mute, and FX Loop switches.
Details on the power and standby switches for safe operation and tube warm-up.
Instructions for connecting the amplifier to the AC power supply and fuse information.
Information on bias test points for power tubes and power tube fault fuses.
Details on connecting speaker cabinets and setting the correct impedance.
Explains how to connect effects units via the FX loop and MIDI devices.
Details on footswitch connection and speaker cabinet lighting.
How to turn the effects loop on and off using the footswitch or front panel.
Explanation of the Send level control for optimizing effects volume.
How to put the effects loop in and out of the signal path.
Step-by-step guide for connecting external effects units to the amplifier's FX loop.
Information on compatible power tubes (KT88, EL34, 6L6GC) and their characteristics.
Details on power tube sockets, mixing tube types, and bias adjustment.
Information about preamp tubes (12AX7, 12AT7) and their function.
How to bias power tubes using a voltmeter without removing the chassis.
Step-by-step guide to setting bias and a chart for recommended set points for different tubes.
Explains how MIDI control integrates the amp with other gear for program changes and function control.
How to toggle OMNI mode for amplifier control across any MIDI channel.
How to automatically or manually set the MIDI channel the amplifier responds to.
How to save amplifier configurations as MIDI program changes.
Lists functions like channel selection, aggression, FX loop, and mute that can be controlled via MIDI.
Details CC numbers for controlling functions like channel selection and aggression levels.
Instructions for connecting the footswitch to the amplifier using an Ethernet cable.
Explains how buttons function in control mode for channel switching, aggression, FX loop, and mute.
How to save and recall amplifier settings (presets) using the footswitch buttons.
How to clear the footswitch memory and return it to factory defaults.
How to mute the amplifier using the footswitch and its LED indicator.
To Next Page
General
